How Thick Is The Acrylic Plate Without Deformation?
Jan 06, 2021
1. The acrylic plate will not deform between 5 mm and 8 mm. The bearing capacity of the acrylic plate is high. The bearing capacity of the acrylic plate will increase with the thickness of the acrylic plate. However, it also needs to be selected according to the different needs of family clothing.
2. Acrylic plate is a kind of hard material, which generally will not deform, but it will change if the external force of the machine is too large.
Expansion: it is widely used in all kinds of trinkets. Acrylic processing has high plasticity and transparent luster. Designers often use it with all kinds of exquisite utensils to increase the material sense and practicability of utensils. Acrylic is a new material of sanitary ware after ceramics. Acrylic has unparalleled high brightness, high toughness, better cleaning and better environmental protection performance of acrylic materials. Before acrylic bonding, the stains and oil stains on the surface of the acrylic plate shall be cleaned. If they are not cleaned, bubbles are likely to appear, because bubbles will appear after bonding. When bonding, the dosage should be uniform and not too much, otherwise, it will affect the beauty of the Alec plate, and it is difficult to remove it. If the quantity is small, the bonding performance of the adhesive will also be affected. After bonding, the dosage will also be large and the curing time will belong. Therefore, before complete curing, it is still necessary to avoid direct illumination and yellowing of glue, which will also have a certain impact on the beauty of the acrylic board.
